EOTech G33.STS 3x Magnifier with Mount (Black) MFR # G33.STS

The 2015 edition of EOTech’s Model XPS3 Holographic Weapon Sight is built to conserve valuable rail space while enabling rapid both-eyes-open sighting and tracking in a variety of conditions. This model’s reticle features a 1 MOA center aiming dot for use at close to medium range, and a second dot under the first for long-range use with a magnifier. To get users on target faster, impact point correction is made at 0.5 MOA per click with a total windage and elevation adjustment range of 40 MOA to compensate for most terrain and conditions. Measuring just 3.8″ and weighing a mere 9oz the XPS2 has an integrated Picatinny/Weaver rail mount, is submersible to 10′, and is internally fog-resistant. It runs on a single CR123 battery with a continuous runtime of about 600 hours at a medium setting, with 20 selectable intensity levels for use in most lighting conditions.

Optical Performance

Magnification: 1x
Unlimited eye relief
Anti-reflective coated optics
Front Window: Shatter-resistant 1/8″ glass
Rear Window: Shatter-resistant 3/16″ laminate
Field of View: 90′ at 100 yards
Window Dimensions: 1.2×0.85″

Reticle

Red illuminated Reticle
68 MOA outer ring
1 MOA center aiming dot for close to mid-range use
Second aiming dot on lower vertical axis for long-range holdover with a magnifier
30 intensity levels
20 levels for use in most lighting conditions
10 additional levels for use with Gen I/II/III night vision devices
Auto battery check indicator
8-hr or 4-hr selectable auto shut-off
Digitally regulated output maintains consistent reticle intensity throughout battery charge
Runs on one CR123 lithium battery

Use and Handling

0.5 MOA adjustment per click at 100 yards
±40 MOA windage/elevation adjustments
Recessed side windage and elevation dials reduce snag points
User-facing raised on/off and intensity selection buttons

Construction Details

Non-reflective black with hard coat finish
Durable housing with aluminum hood assembly
Submersible to 33′
Internally fog resistant
Integrated Picatinny/Weaver rail mount
Made in the USA

Short and sweet – the tan L-3 EOTech EXPS3-0 holographic red-dot sight provides rapid heads-up-both-eyes-open target acquisition. Sporting a shortened form factor like the original XPS3, The EXPS3-0 also boasts a repeatable quick release throw-lever mount.

Because it’s powered by a single transverse-mounted CR123A battery, the EXPS3 is shorter than the N and AA battery versions – yet it delivers the same parallax-free sighting capabilities. This sight requires a mere 2.75″ of rail space, and the battery compartment is raised to accommodate the Delta Ring of most M16/AR15 platform firearms. The base is configured with a 7.0mm rise to accommodate hand guards and instant access to BUIS. The battery cap is a simple screw-type cover that’s o-ring sealed and tethered to the housing.

The control buttons have been placed on the left side of the rugged aluminum housing for ease of operation with a rear-mounted night vision device. The illuminated reticle is configured with a 65 MOA circle and a single 1 MOA dot – the illumination system provides the operator with 30 brightness levels to choose from, 10 of which are compatible with night vision gear.

Designed for today’s high-tech battlefield; the EXPS3-0 is submersible to a depth of 33′, and the QR throw-lever mount is repeatable to 2 MOA after remounting. The rear window is a 3/16″ thick shatterproof laminate with anti-glare and scratch resistant coatings, and the front lens is 1/8″ solid glass. Because the optical system is based upon transmission holography, parallax error is not an issue – a mission-critical feature that can save your hams when the mayonnaise hits the fan.

The RMR Sight from Trijicon provides optimum red-dot visibility against the target for rapid target acquisition and precise shot placement. Designed with longevity and repeatability in mind – the RMR (Ruggedized Mini Reflex) features a durable forged aluminum housing and hard-coated window to ensure long-term reliable service.

This permutation of the RMR is configured with a 3.25 MOA red-dot reticle that’s powered by a standard CR2032 battery. Audible clicks allow for easy and quick windage and elevation adjustments.

3.25 MOA red dot reticle

LED sight powered by one included standard CR2032 battery

Forged aluminum housing furnishes durability and protection

Hard-coated optical glass window helps prevent scratches and scouring

Auto or manual adjustment of plus or minus buttons on either side of the unit for eight brightness settings

Every feature of the ACOG’s (Advanced Combat Optical Gunsight) mechanical and optical design was designed for use with the M16 family of firearms. This sighting system was engineered for a single purpose: to provide increased hit potential in all lighting conditions – without relying upon failure-prone batteries.

Although the ACOGs have many features which are very advantageous for military use, they’re equally well adapted for sporting and tactical applications. These compact telescopic sights are internally adjustable, with tritium illuminated reticles for use in low-light conditions.

This 4×32 ACOG puts adaptability and flexibility into the operator’s hands – a necessary edge when the stakes are high, and the terms of engagement are uncertain.

Whether the day’s work involves precise long-range shot-placement, room-clearing, close-quarters MOUT engagements or high-stress fast-breaking action – sighting through the 4×32 ACOG is comfortable and intuitive. This ACOG’s reticle is calibrated for the 6.8 SPC cartridge – the unique horshoe/dot target reference system offers bullet drop hash marks out to 800 meters, and the ability to gauge hold-offs in windy conditions or moving targets. The 4x magnification offers a respectable FOV and the ability to employ the Bindon Aiming Concept for a both-eyes-open technique that greatly enhances the operator’s situational awareness.

Rugged Construction
Forged 7075-T6 aircraft aluminum alloy housing

Flat-Top Compatible
Designed for use with standard M16/AR15 firearms with flat-top receivers

Bindon Aiming Concept
The Bindon Aiming Concept was devised by Trijicon’s founder, Glyn Bindon. The BAC method of aiming with both eyes open ensures a far superior sense of balance, and a wider field-of-view. Combining these benefits with a magnified Trijicon sight gives you a considerable advantage over your target.

Dual Illuminated Red Horseshoe w/ Red Dot Reticle – 6.8 SPC
The red horseshoe reticle features dual illumination from Trijicon’s proprietary tritium/fiber-optic technology. During day or nighttime a red dot at the center of the sight picture indicates your point of aim. The dot is surrounded by an illuminated horseshoe that sits atop the 6 o’clock post.
Thin posts at 3, 6, and 9 o’clock feature hash-marks for bullet-drop compensation for distances up to 800 m, and hold-off points for moving targets or windage compensation. Dual 2 MOA floating dots that sit 5 mils off-center enhance the reticle’s flexibility when distance ranging or following moving targets.

The 2015 edition of EOTech’s black Model 512 Holographic Weapon Sight (HWS) is designed to allow fast and easy target acquisition and tracking, with small to medium caliber platforms, for close to medium encounters. It features an illuminated holographic red dot reticle, anti-reflection multicoated optics, and waterproof. The sight has a 90′ field of view at 100 yards and an unlimited eye relief to ensure users maintain their situational awareness, especially when moving quickly.

To get users on target is 0.5 MOA per click impact point correction, with ±40 MOA windage and elevation adjustments to compensate for most conditions or situations. Complementing the sight’s performance is a rugged housing made of a lightweight and durable aluminum alloy with a black anodized finish. It is O-ring sealed to make it waterproof and submersible to a depth of 10′, with a fog-resistant interior. The controls are all inset so there are no protruding knobs or rings to obscure targets. An integrated Picatinny/Weaver rail mount allows it to be quickly removed and re-installed without the need to be re-zeroed.

Optical Performance

1x magnification
1.2×0.85″ window
Anti-reflective coated optics
90′ field of view at 100 yd
Front window: 0.125″ thick glass
Rear window: 0.1875″ laminate

Reticle

Red-Dot reticle
1 MOA center aiming dot
68 MOA circle with quadrant ticks
Illumination: 0.08mW/650nm Class II laser
20 selectable intensity levels

Use and Handling

0.5 MOA per click impact point correction
±40 MOA windage and elevation adjustment range
10 MOA travel per rotation
Auto shut off, selectable at either 8 or 4 hours
Up to 1000 hr continuous runtime
Digitally regulated output maintains consistent reticle intensity throughout battery charge
Battery level indicator: Reticle blinks when available charge is at or below 20%

Construction Details

Lightweight aluminum housing
Corrosion and scratch-resistant black anodized finish
Integrated Picatinny/Weaver rail mount
Waterproof and submersible to 10′
Internally fog-resistant
Inset controls with no protruding knobs, battery compartments, or rings obscuring the target
Runs on two AA batteries – lithium, alkaline, or rechargeable
Weight: 11.1 oz

Intended for use on rifles, carbines, and shotguns to provide fast target acquisition and tracking, the Trijicon 1×25 MRO Reflex Sight is an ideal compact and lightweight optic for just about any long gun. Weighing a mere 4.1oz and measuring just 2.6″ long the “Miniature Rifle Optic” features optical glass elements and broadband multicoatings to ensure the dot stays crisp and clean in all weather, with a simple 2 MOA illuminated red dot reticle. Eight brightness levels allow users to precisely choose the appropriate intensity for the lighting conditions, and between each level is an “off” position to quickly move from off to a preferred level without having to cycle through outputs.

To get users on-target faster the MRO has 1/2 MOA impact point correction with a 70 MOA windage and elevation adjustment range to compensate for most wind and terrain conditions. The housing is made of a 7075-T6 aluminum alloy with a scratch and corrosion resistant anodized finish to withstand rough use in the field. O-rings seal the nitrogen-filled housing for fogproof performance in extreme temperatures, and allows it to be submerged to a depth of up to 100 feet. Employing energy efficient electronics, the MRO runs on a single Cr2032 battery and has a continuous runtime of up to 5 years on the medium intensity setting. This version of the MRO includes an adapter to mount the sight on Picatinny rails, and sets it off the rail 1.538″ to the optical axis for fully co-witnessing with the front iron sight.

Optical Performance

1x magnification
25mm objective
20.4mm clear aperture
Anti-reflection broadband multicoated optics
Virtually unlimited field of view when used with both eyes open

Reticle

2 MOA red dot reticle
Illuminated with 8 brightness settings
“Off” positions between each intensity for quick repeatability
Top control dial for ambidextrous use

Use and Handling

1/2 MOA per click impact point correction
70 MOA windage and elevation adjustment range
Flush adjustment dials for reduced snag-points
Unlimited eye relief
Parallax-free

Construction Details

Lightweight and durable 7075-T6 aluminum alloy housing
Corrosion and scratch-resistant anodized housing
Nitrogen-filled, water and fogproof. Submersible to 100′ (30m)
Runs on one CR2032 battery
Five-year continuous runtime on setting #3
Includes adapter to mount sight on Picatinny rails. Sets sight off rail 1.538″ to optical axis for fully co-witnessing with front iron sight
Weighs just 4.1oz with battery
Made in the USA