SUREFIRE Fury Click Switch SF-P3XC-A
$250.00 $225.00
UPC Code: 084871323956
•MAP Price: $225.00
•Is Hazardous Material?: No
•Manufacturer Part Number: P3XC-A
•Country of Origin: 0
•Weight: .50
Fury, 9V, Click Switch, 15 / 1000 Lu., Dual Output, Knurled Alum Black Type Iii Ano
Fury, 9V, Click Switch, 15 / 1000 Lu., Dual Output, Knurled Alum Black Type Iii Ano
Related Products
Fenix Flashlight LD09 LED Flashlight (11/2015 Edition) MFR # LD09XPBK-B
Designed to be versatile enough for use at home, on the trail, or on-duty, Fenix’s LD09 LED Flashlight has been upgraded over previous iterations to be a more powerful illumination tool that still fits comfortably in the palm of your hand. Its 3-lumen low output is ideal for tasks like reading, while the 220-lumen high setting will light a trail or large area. If you use one AA alkaline battery instead of a 14500 Li-ion, all outputs remain the same but with different runtimes, and a lower turbo output of 130 lumens. An emergency SOS signal mode, when activated, automatically cycles through the Morse code sequence so you don’t have to if you’re incapacitated.
To stand up to a long life in the field, the LD09’s aluminum housing features a corrosion and scratch-resistant type III hard anodized finish. It is impact resistant to 3.3′ and O-ring sealed to give it an IPX8-rating to be submersible to 6.6′. The emitter window is made of impact and scratch resistant glass with anti-reflection coatings to maximize light transmission. Multiple safety circuitries are in-place to protect the light from damage caused by incorrectly installed batteries or excessive heat. Additional circuitry detects the battery chemistry being used and adjusts the performance accordingly to maximize the battery life while digitally maintaining the output to provide a consistent beam intensity throughout the life of the battery charge.
Performance
Low: 3 lumen
Med: 50 lumen
High: 220 lumen (with 14500 battery) or 130 lumen (with AA battery)
White Cree XP-E2 (R3) LED
SOS distress signal automatically cycles through Morse code sequence
Reflector produces a smooth beam with bright center cone and dimmer peripheral ring
Switching
Type: 2-stage pushbutton
Location: tailcap
Momentary and constant-on modes
All beam intensities and SOS signal mode accessible by using pushbutton switch
Partially shrouded tailcap switch helps to prevent accidental activation
Construction
Lightweight and durable aluminum housing
Type III corrosion and scratch-resistant hard anodized finish
IPX8-rated submersible to 6.6′ for up to 30 minutes
Impact resistant to 3.3′
Scratch and impact-resistant tempered and anti-reflection coated glass window
Anti-roll collar helps to keep light from moving or shifting position
Electrical
Runs on one AA alkaline (included), AA Ni-MH or 14500 Li-ion battery
Intelligent drive circuitry automatically detects battery type installed and adjusts to maximize performance
Digitally regulated output maintains consistent intensity throughout life of battery
Reverse polarity protection prevents damage due to improper battery installation
Overheat protection automatically steps-down output to prevent damage to circuitry
Fenix Flashlight E12 LED Flashlight MFR # E12R4BK-B
The E12 LED Flashlight from Fenix is an easy to operate, ultra-compact, three-mode LED flashlight. The CREE XP-E2 LED delivers a maximum 130 lumen beam using just one AA battery. A second mode has 50 lumens output, and a low mode has 8 lumens output. The E12 is waterproof to 6.5′, and impact resistant up to a 3.3′ fall. Its 3.5″ body is constructed from hard-anodized aluminum with a high-efficiency total reflection lens. A digitally regulated circuit maintains constant brightness in the beam and a tail cap switch provides on/off and mode selection.
At the 130-lumen output, the maximum runtime is 1.5 hours. At 50 lumens, the maximum runtime is 6.5 hours, and at the lowest 8-lumen output, it can operate for up to 40 hours. Reverse polarity protection guards against damage from accidentally inserting the battery in the wrong orientation. It weighs just 1 oz without battery.
Compact, easy-to-use flashlight with three output levels.
Maximum of 130 lumens, with up to a 1.5-hour runtime
Second mode produces 50 lumens with an 6.5-hour runtime
Third mode is 8 lumens with a maximum runtime of 40 hours.
Runtimes are based on usage with a NiMH AA battery. When using an alkaline AA battery, runtimes are shorter.
Produces 1936 candelas and a beam that travels approximately 289′.
Waterproof to IPX8 standard–6.5′ depth, and impact resistant to 3.3′ (1.0 m)
Made of hard-anodized aluminum alloy with a high-efficiency total reflection broad beam lens.
Ultra-compact and lightweight for convenient carry in pocket or purse. Measures just 3.5″ and weighs 1 oz.
CREE XP-E2 LED with a 50,000-hour lifetime
Powered by 1x NiMH or Alkaline AA battery, with reverse polarity protection and over-heat protection.
Fenix Flashlight LD22 Flashlight MFR # LD22XLBK-B
Equipped with a white CREE XP-G2 R5 LED, the Fenix LD22 LED Flashlight is a versatile and easy-to-use illumination tool. It produces a low output of 5 lumens for tasks such as reading, and a high 300-lumen output for lighting large areas. The side switch features last-mode memory, so the next time it’s turned on it automatically goes to the last light mode used. The light also features six output modes: low, medium, high, turbo, strobe, and SOS.
Designed for a long life of use, the aluminum housing has a corrosion and scratch-resistant type III hard anodized finish. The flashlight is impact resistant to 3.3′ and submersible to 6.6′. The emitter’s window is made of impact and scratch resistant glass with anti-reflection coatings to maximize light transmission. Beyond, the flashlight’s body features anti-rolling function and a pocket clip. The handle has fine diamond-shaped texturing for a comfortable non-slip grip. The tailcap pushbutton also has fine texturing and is surrounded by two attachment loops that form a semi-shroud.
Light Performance
5/30/100/300 lumens
CREE XP-G2 R5 LED
Tempered and anti-refection coated LED window
Turbo, high, medium, low, strobe, and SOS output modes
Switching
On/off: tailcap pushbutton
Output modes: side switch
Regulating circuit maintains constant brightness
Reverse polarity protection function
Construction Details
Aluminum with Type III hard anodizing
Anti-roll body design
Knurled handle
Pocket clip
IPX-8 waterproof
Impact-resistant to 3.3′
Fenix Flashlight TK35 Flashlight (Ultimate Edition 2015) MFR # TK35XHUE
Characterized by its sleek form factor and impressive performance, the 2015 Ultimate Edition TK35 Flashlight from Fenix features a Cree XHP 50 LED to provide a maximum output of 2000 lumens. Four additional brightness levels are available, down to 20 lumens, as well as S.O.S. and strobe modes, and switching is controlled via dual tailcap pushbutton switches. The flashlight is constructed from aluminum alloy and has a hard anodized finish to protect against abrasions, and it is also IPX8-rated and impact-resistant to withstand harsh conditions. It runs on either two 18650 rechargeable lithium-ion batteries or four CR123A batteries, and a low-voltage indicator is incorporated to display when battery replacement is required.
Performance
Eco: 20 lumen
Low: 120 lumen
Medium: 380 lumen
High: 1050 lumen
Turbo: 2000 lumen
One bright white Cree XHP 50 LED
Strobe and S.O.S. modes
Digitally-regulated output for consistent brightness
Switching
Dual tailcap pushbutton switches
Slight press to activate momentary-on, full press to activate constant on/off
Dedicated mode changing switch
Construction
Material: Lightweight and sturdy aluminum alloy
Finish: Type III hard anodized finish
Emitter window: Toughened clear glass lens with anti-reflective coating
Waterproofing: IPX8-rated, dust and water-resistant
Impact-resistant
Anti-slip ridges on side for more secure grip
Low-voltage reminder indicates when battery replacement is needed
Reverse polarity protection to prevent improper battery installation
Runs on two 18650 rechargeable lithium-ion batteries or four CR123A lithium batteries
Fenix Flashlight E25 Ultimate Edition Flashlight MFR # E25UEBK-B
Featuring a compact form factor and versatile power options, the E25 Ultimate Edition from Fenix houses a Cree XP-L LED, which affords a maximum brightness level of up to 1000 lumens. Four other brightness settings are available, down to a 5 lumen Eco mode, and both strobe and SOS modes are also accessible. Either two 14500 or two AA batteries can be used as the power source, and an intelligent drive circuit automatically detects the battery type in use to determine the available output levels. The flashlight is constructed from durable aluminum alloy and has a Type III hard anodized finish to resist scratching. Additionally, it is IPX8-rated to resist dust and water, and is also impact-resistant.
Performance
Eco: 5 lumen
Low: 50 lumen
Med: 160 lumen
High: 350 lumen
Turbo: 1000 lumen
One Cree XP-L LED, rated for a 50,000-hour lifespan
SOS and strobe modes
Intelligent drive circuit automatically detects battery type used to determine usable output levels
Digitally-regulated output for consistent brightness
Time-limited down-shift from Turbo and High modes to prevent overheating
Switching
Dual side switch
Lock-out function prevents accidentally turning on
Auxiliary switch to enter strobe
Master switch to enter general mode
Single click changes output; long press turns off light
Construction
Material: Lightweight and sturdy aluminum alloy
Finish: Type III hard anodized finish
Toughened clear glass lens with anti-reflective coating
Waterproofing: IPX8-rated, dust and water-resistant
Impact-resistant
Uses two 14500 rechargeable lithium-ion or two AA NiMH or alkaline batteries
Reverse polarity protection
Flat tailcap for standing upright
Streamlight Stinger DS LED Rechargeable Flashlight (Black) MFR # 75813
Make a useful addition to your tool crib, professional, or outdoor gear with the lightweight yet durable Streamlight Stinger LED Rechargeable Flashlight. The flashlight features a parabolic light reflector that provides a tightly collimated beam suitable for distance illumination and an even peripheral cone of light. Its C4 LED produces from 85 to 350 lumens of bright white light, which you can use for illuminating a path on your mission, trail, or a campsite with high, medium, low modes. Use the conveniently situated head-mounted pushbutton to turn the light on or off and to signal your friends or rescue teams with a strobe or momentary on modes. To provide a beam of constant brightness regardless of battery status, the flashlight has a power-regulating circuit.
The housing is made of lightweight and durable aluminum with an impact resistance rating to 3.3′. It is also sealed with an o-ring to offer water-resistant performance and ensure flawless operation in adverse weather conditions. For added durability, the lens is made of extremely impact-resistant polycarbonate. To offer comfort and versatility, the light also features a non-slip textured rubberized handle.
Light Performance
85/175/350 Lumens
Power-regulated C4 white LED emitter
Low, medium, high, strobe, and momentary-on modes
Construction Details
Strong polycarbonate lens with impact-resistant coating
Dual switching: head-mounted and tailcap pushbuttons switches between lighting modes
Lightweight and durable aluminum housing with rubberized handle
Water-resistant and sealed with o-ring
Impact-resistant to drops from 3.3′
Rubber anti-roll ring
Fenix Flashlight TK15UE LED Flashlight (Gray) MFR # TK15UEGY
Built with law enforcement, search and rescue, and military personnel in mind, the gray Fenix TK15UE LED Flashlight features tactical-use design features and a brilliant 1,000-lumen maximum output. At 5.6″, it offers robust functionality in a compact package.
The optical system features a regulated, white Cree XP-L HI V3 LED and an anti-reflection coated window that increases transmission. Use the click-type tailcap pushbutton switch for on/off or momentary modes, and the side switch to cycle through the four brightness settings and strobe. The O-ring and gasket-sealed weatherproof housing features a crenellated bezel for personal protection or breaking window glass. The light is compatible with Fenix AER-02/AER-03 remote pressure switches.
Constructed of Type III hard anodized aluminum, the TK15UE is equipped with a toughened ultra-clear glass lens with anti-reflective coating for optimal light transmission. It has built-in overheat and reverse polarity protections, and its output is digitally-regulated for consistent brightness across the battery charge. An anti-roll ring protects the light when set down. The light runs on one 18650 rechargeable lithium-ion battery or two CR123A lithium batteries, sold separately.
Light Performance
10 / 150 / 350 / 1000 lumens
White Cree XP-L HI V3 LED
Disorienting strobe mode
Crenellated bezel ring
Anti-reflection coated window improves light transmission
Digitally-regulated output for consistent performance
Switching
Tailcap pushbutton: Momentary and constant-on
Side pushbutton: Output selection
Compatible with select Fenix AER-02 and AER-03 remote pressure switches
Construction Details
Type III hard anodized aluminum construction
Smooth 1.3″ bezel
Textured handle for a secure grip
Overheat and reverse polarity protection
Weatherproof with O-rings and gasket-sealed
Fenix RC40 Rechargeable LED Flashlight MFR#FNX-RC40XLBK
UPC Code: 6942870303734 •MAP Price: $369.95 •Is Hazardous Material?: No •Manufacturer Part Number: RC40XLBK •Country of Origin: 0 •Weight: 2.69 Fenix RC40 Rechargeable LED Flashlight – 6000 Lumens The mega POWERHOUSE is now out. NEW Fenix RC40 – 6000 Lumens for your extreme outdoor adventures! This … Read More
Reviews
There are no reviews yet.