Description
Product Highlights
6.5 MOA Red Dot Reticle
LED Reticle Illumination
Adjustable Brightness
Cerakote Ceramic Coated Aluminum
Windage and Elevation Adjustment
Waterproof to 65′
$645.00
The OD green RM07 RMR Reflex Sight from Trijicon provides optimum red-dot visibility against the target for rapid target acquisition and precise shot placement. Designed with longevity and repeatability in mind – the RMR (Ruggedized Mini Reflex) is waterproof to 65′ and features a durable aluminum housing with a wear, corrosion, chemical, chip, and scratch-resistant Cerakote ceramic coating, and hard-coated window to ensure long-term reliable service.
This version of the RMR is configured with an adjustable-brightness 6.5 MOA red-dot reticle that’s powered by a standard CR2032 battery. Audible clicks allow for easy and quick windage and elevation adjustments.
6.5 MOA red dot reticle
LED sight powered by one included standard CR2032 battery
Forged aluminum housing with OD green wear, corrosion, chemical, chip, and scratch-resistant Cerakote ceramic coating
Hard-coated optical glass window helps prevent scratches and scouring
Eight brightness levels, with auto or manual adjustment
Waterproof to 65′
Product Highlights
6.5 MOA Red Dot Reticle
LED Reticle Illumination
Adjustable Brightness
Cerakote Ceramic Coated Aluminum
Windage and Elevation Adjustment
Waterproof to 65′
Trijicon’s RX34 Reflex Sight features a TA51 Picatinny-Weaver rail mount and the battery-free tritium/fiber optic dual illumination system. This illumination system ensures that the green 4.5 MOA aiming point remains visible at all times by channeling ambient light when it’s available or emitting light using tritium in very low or no light conditions. The RX34 sports a large 42mm objective that provides a large viewing window allowing for fast both-eyes-open target acquisition and tracking. Its medium-sized aiming dot ensures that users will be able to keep it in sight without having it obstruct smaller targets.
Performance
1x magnification
Objective: 42 mm
Unlimited eye relief and field of view
Parallax-free both-eyes-open sighting
Use and Handling
Green 4.5 MOA aiming dot
1 MOA per click impact point correction
±60 MOA windage and elevation adjustment range
Battery-free tritium and fiber optic dual-illumination system
Fiber optics: Focuses, channels, and filters ambient light to illuminate the reticle
Tritium isotope: Interacts with a phosphors membrane in the system to create illumination for the reticle
Construction Details
A356-T6 aluminum housing
Scratch and corrosion-resistant anodized finish
TA51 mount: Picatinny rail compatible
Height of mount surface to optical axis: 1.506″ / 38.25mm
Made in the USA
The 2015 edition of EOTech's Model EXPS2 Holographic Weapon Sight is built to conserve valuable rail space while enabling rapid both-eyes-open sighting and tracking in a variety of conditions. This model's reticle features a 68 MOA outer ring a 1 MOA center aiming dot for use in close to medium range encounters and a second dot below it for longer range use with magnifiers. To get users on target faster, impact point correction is made at 0.5 MOA per click with a total windage and elevation adjustment range of 40 MOA to compensate for most terrain and conditions. Measuring just 3.8″ and weighing a mere 11.2oz the EXPS2 has an integrated quick-release Picatinny/Weaver rail mount for fast and easy removal and reinstallation without having to re-zero, is submersible to 33', and is internally fog-resistant. It runs on a single CR123 battery with a continuous runtime of about 600 hours at a medium setting, with 30 selectable intensity levels: 20 for use from dawn to dusk and another 10 for use with Gen I/II/III night vision devices when operating in the dark.
Optical Performance
Magnification: 1x
Unlimited eye relief
Anti-reflective coated optics
Front Window: Shatter-resistant 1/8″ glass
Rear Window: Shatter-resistant 3/16″ laminate
Field of View: 90' at 100 yards
Window Dimensions: 1.2×0.85″
Reticle
Red illuminated reticle
68 MOA outer ring
Ring / Double Aiming Dots
30 brightness settings
20 intensity levels for daytime use
10 levels for use with Gen I/II/III night vision devices
Easily toggle between regular and night vision levels
Auto battery check indicator
8-hr or 4-hr selectable auto shut-off
Digitally regulated output maintains consistent reticle intensity throughout battery charge
Runs on one CR123 lithium battery
Use and Handling
0.5 MOA adjustment per click at 100 yards
±40 MOA windage/elevation adjustments
Recessed side windage and elevation dials reduce snag points
User-facing raised on/off and intensity selection buttons
Construction Details
Non-reflective black with hard coat finish
Durable housing with aluminum hood assembly
Submersible to 33'
Internally fog resistant
Integrated quick-release Picatinny/Weaver rail mount
Self-adjusting mechanism compensates for variation in tolerances to keep the sight centered on the rail
Made in the USA
Intended for use on rifles, carbines, and shotguns to provide fast target acquisition and tracking, the Trijicon 1×25 MRO Reflex Sight is an ideal compact and lightweight optic for just about any long gun. Weighing a mere 4.1oz and measuring just 2.6″ long the “Miniature Rifle Optic” features optical glass elements and broadband multicoatings to ensure the dot stays crisp and clean in all weather, with a simple 2 MOA illuminated red dot reticle. Eight brightness levels allow users to precisely choose the appropriate intensity for the lighting conditions, and between each level is an “off” position to quickly move from off to a preferred level without having to cycle through outputs.
To get users on-target faster the MRO has 1/2 MOA impact point correction with a 70 MOA windage and elevation adjustment range to compensate for most wind and terrain conditions. The housing is made of a 7075-T6 aluminum alloy with a scratch and corrosion resistant anodized finish to withstand rough use in the field. O-rings seal the nitrogen-filled housing for fogproof performance in extreme temperatures, and allows it to be submerged to a depth of up to 100 feet. Employing energy efficient electronics, the MRO runs on a single Cr2032 battery and has a continuous runtime of up to 5 years on the medium intensity setting. This version of the MRO includes an adapter to mount the sight on Picatinny rails, and sets it off the rail 1.538″ to the optical axis for fully co-witnessing with the front iron sight.
Optical Performance
1x magnification
25mm objective
20.4mm clear aperture
Anti-reflection broadband multicoated optics
Virtually unlimited field of view when used with both eyes open
Reticle
2 MOA red dot reticle
Illuminated with 8 brightness settings
“Off” positions between each intensity for quick repeatability
Top control dial for ambidextrous use
Use and Handling
1/2 MOA per click impact point correction
70 MOA windage and elevation adjustment range
Flush adjustment dials for reduced snag-points
Unlimited eye relief
Parallax-free
Construction Details
Lightweight and durable 7075-T6 aluminum alloy housing
Corrosion and scratch-resistant anodized housing
Nitrogen-filled, water and fogproof. Submersible to 100′ (30m)
Runs on one CR2032 battery
Five-year continuous runtime on setting #3
Includes adapter to mount sight on Picatinny rails. Sets sight off rail 1.538″ to optical axis for fully co-witnessing with front iron sight
Weighs just 4.1oz with battery
Made in the USA
EOTech added a dual dot reticle option to the black Model 518 Holographic Weapon Sight (HWS) to compensate for bullet drop at longer distances. Designed to allow fast and easy target acquisition and tracking, with small to medium caliber platforms, it is also compatible with magnifiers to extend the sight’s reach for further accuracy. The 518 features an illuminated holographic red dot reticle, anti-reflection multi-coated optics, a 90′ field of view at 100 yards, and an unlimited eye relief to ensure that users maintain their situational awareness – especially when moving quickly.
Optical Performance
1x magnification
1.2×0.85″ window
Anti-reflective coated optics
90′ field of view at 100 yd
Front window: 0.125″ thick glass
Rear window: 0.1875″ laminate
Reticle
Dual red dot reticle
1 MOA aiming dots
68 MOA circle with quadrant ticks
Illumination: 0.08mW / 650nm Class II laser
20 selectable intensity levels
Use and Handling
Control buttons and adjustment dials located on the side for use with magnifiers
0.5 MOA per click impact point correction
±40 MOA windage and elevation adjustment range
10 MOA travel per full rotation
Auto shut off, selectable at either 8 or 4 hours
Up to 1000 h continuous runtime
Digitally regulated output maintains consistent reticle intensity throughout battery charge
Battery level indicator: Reticle blinks when available charge is at or below 20%
Construction Details
Lightweight aluminum housing
Corrosion and scratch-resistant black anodized finish
Quick release Picatinny/Weaver rail mount
Self-adjusting mechanism compensates for variation in tolerances to keep the sight centered on the rail
Waterproof and submersible to 10′
Internally fog-resistant
Inset controls with no protruding knobs, battery compartments, or rings obscuring the target
Runs on two AA batteries – lithium, alkaline, or rechargeable
Weight: 13.8 oz
The 2015 edition of EOTech’s Model XPS2 Holographic Weapon Sight is built to conserve valuable rail space while enabling rapid both-eyes-open sighting and tracking in a variety of conditions. This model’s reticle features a 68 MOA outer ring with quadrant stadia, and a 1 MOA center aiming dot. To get users on target faster, impact point correction is made at 0.5 MOA per click with a total windage and elevation adjustment range of 40 MOA to compensate for most terrain and conditions. Measuring just 3.8″ and weighing a mere 9 oz the XPS2 has an integrated Picatinny/Weaver rail mount, is submersible to 10′, and is internally fog-resistant. It runs on a single CR123 battery with a continuous runtime of about 600 hours at a medium setting, with 20 selectable intensity levels for use in most lighting conditions.
Optical Performance
Magnification: 1x
Unlimited eye relief
Anti-reflective coated optics
Front Window: Shatter-resistant 1/8″ glass
Rear Window: Shatter-resistant 3/16″ laminate
Field of View: 90′ at 100 yards
Window Dimensions: 1.2×0.85″
Reticle
Red illuminated Reticle
68 MOA outer ring with quadrant stadia
1 MOA center aiming dot
20 intensity levels for use in most lighting conditions
Auto battery check indicator
8-hr or 4-hr selectable auto shut-off
Digitally regulated output maintains consistent reticle intensity throughout battery charge
Runs on one CR123 lithium battery
Use and Handling
0.5 MOA adjustment per click at 100 yards
±40 MOA windage/elevation adjustments
Recessed side windage and elevation dials reduce snag points
User-facing raised on/off and intensity selection buttons
Construction Details
Non-reflective black with hard coat finish
Durable housing with aluminum hood assembly
Submersible to 10′
Internally fog resistant
Integrated Picatinny/Weaver rail mount
Made in the USA
The 2015 edition of EOTech’s Model XPS3 Holographic Weapon Sight is built to conserve valuable rail space while enabling rapid both-eyes-open sighting and tracking in a variety of conditions. This model’s reticle features a 1 MOA center aiming dot for use at close to medium range, and a second dot under the first for long-range use with a magnifier. To get users on target faster, impact point correction is made at 0.5 MOA per click with a total windage and elevation adjustment range of 40 MOA to compensate for most terrain and conditions. Measuring just 3.8″ and weighing a mere 9oz the XPS2 has an integrated Picatinny/Weaver rail mount, is submersible to 10′, and is internally fog-resistant. It runs on a single CR123 battery with a continuous runtime of about 600 hours at a medium setting, with 20 selectable intensity levels for use in most lighting conditions.
Optical Performance
Magnification: 1x
Unlimited eye relief
Anti-reflective coated optics
Front Window: Shatter-resistant 1/8″ glass
Rear Window: Shatter-resistant 3/16″ laminate
Field of View: 90′ at 100 yards
Window Dimensions: 1.2×0.85″
Reticle
Red illuminated Reticle
68 MOA outer ring
1 MOA center aiming dot for close to mid-range use
Second aiming dot on lower vertical axis for long-range holdover with a magnifier
30 intensity levels
20 levels for use in most lighting conditions
10 additional levels for use with Gen I/II/III night vision devices
Auto battery check indicator
8-hr or 4-hr selectable auto shut-off
Digitally regulated output maintains consistent reticle intensity throughout battery charge
Runs on one CR123 lithium battery
Use and Handling
0.5 MOA adjustment per click at 100 yards
±40 MOA windage/elevation adjustments
Recessed side windage and elevation dials reduce snag points
User-facing raised on/off and intensity selection buttons
Construction Details
Non-reflective black with hard coat finish
Durable housing with aluminum hood assembly
Submersible to 33′
Internally fog resistant
Integrated Picatinny/Weaver rail mount
Made in the USA
Designed to be used with small-to-medium weapons for close quarters combat, the black XPS2-300 Blackout Sight from EOTech features an illuminated holographic 300 Black Zero Reticle with two red dots, and waterproof and fog-resistant construction. It offers 1x magnification, 90′ at 100 yd linear field of view, and multicoated optical elements. You can compensate for crosswinds and ballistic bullet with a total of 80 MOA of windage and elevation adjustments. The increment is 1/2 MOA per click.
Designed for both subsonic and supersonic rounds, the reticle features two laser-illuminated 1 MOA dots and a 68 MOA circle. It allows the shooter to zero either subsonic or supersonic rounds. The center red dot allows aiming for subsonic rounds at 50 yards and supersonic rounds at 200 yards. The lower red dot allows aiming for subsonic rounds at 150 yards and supersonic rounds at 300 yards.
The housing is made of lightweight aluminum and offers a waterproof and fog-resistant performance. Its mount is compatible with Picatinny and Weaver style rails.
Optical Performance
1x magnification
Multiple anti-reflective coatings
Linear field of view: 90′ @ 100 yd
Window dimensions: 1.2 x 0.85″
Front window: 1/8″ glass
Rear window: 3/16″ laminate
300 Black Zero Reticle
Holographic reticle with two red dots
1 MOA dots with and 68 MOA circle
Illumination: 0.08mW/650nm Class II laser
20 illumination levels
Auto power shut-off after 8 or 4 hr
600-hour runtime
Use and Handling
Battery indicator
1/2 MOA impact point correction
80 MOA windage and elevation
Construction Details
Compact aluminum housing
Compatible with Picatinny and Weaver rails
Waterproof and submersible to 10′
Fog-resistant
The matte black RM07 RMR Reflex Sight from Trijicon provides optimum red-dot visibility against the target for rapid target acquisition and precise shot placement. Designed with longevity and repeatability in mind – the RMR (Ruggedized Mini Reflex) is waterproof to 65′ and features a durable aluminum housing with a scratch and corrosion-resistant hard-anodized finish, and hard-coated window to ensure long-term reliable service.
This version of the RMR is configured with an adjustable-brightness 6.5 MOA red-dot reticle that’s powered by a standard CR2032 battery. Audible clicks allow for easy and quick windage and elevation adjustments.
6.5 MOA red dot reticle
LED sight powered by one included standard CR2032 battery
Forged aluminum housing with matte black scratch and corrosion-resistant hard-anodized finish
Hard-coated optical glass window helps prevent scratches and scouring
Eight brightness levels, with auto or manual adjustment
Waterproof to 65′
Reviews
There are no reviews yet.